PDA

View Full Version : Centerbrace?


Troy F
04-10-2005, 11:39 PM
Does anyone know if the Oceanic 58gal RR tank has a center brace?

Doug
04-11-2005, 12:08 AM
Its been many years since I owned mine but it never had a brace. I ran a vertical pendant/w a 250 Iwasaki over it.

Troy F
04-11-2005, 12:12 AM
Thanks Doug, I'm looking at getting that Coralife fixture with the 150W HQI, 2 PC Actinics and the moonlighting but the MH is right in the middle.

Willow
04-11-2005, 12:18 AM
you know the coralife 250 watt hqi's should be available soon.

Troy F
04-11-2005, 12:31 AM
I wasn't aware but am looking at a lower light system. Thanks for the input.

Troy F
04-11-2005, 04:34 AM
Well, I just received a reply over at reefs.org and the person stated that they have a glass centerbrace so they've either changed their design or the other fellow was mistaken (I hope).

Doug
04-11-2005, 01:31 PM
Well, I just received a reply over at reefs.org and the person stated that they have a glass centerbrace so they've either changed their design or the other fellow was mistaken (I hope).

I assume thats the 3ft. tank. Mine was from about 7yrs. ago, so many changes could have been made. Or my memory has faded, :eek: I would think as long as a tank that size is made from at least 3/8th. glass with 1/2in. being a preference and running some type of Eurobrace would be fine. Mine, I believe had the hard plastic Eurobrace around it.

You should be able to see one at a Petland type store. Does Oceanic have a web page?

Troy F
04-11-2005, 01:39 PM
Oceanic does have a website but it doesn't say whether or not there's a brace. I was at J&L's and the 65gal does but it's 24" high. I'm going to go back to another store and see if the one they had hasn't been picked up yet.

danny zubot
04-11-2005, 02:44 PM
Hey Troy, I just bought the 65 gallon tank a few weeks ago. I cut off the center brace and replaced it with a piece of 1/2 inch glass. The glass for it only cost me $10. If the 58 gallon has one you could very easily do the same.

Doug
04-11-2005, 04:47 PM
I see someone on RDO agreed with me. Mine was the 20in. high model Tony.

Troy F
04-11-2005, 09:30 PM
Doug, you're right. No center brace on the 58. I went and looked at one at King Ed's. I don't know how I could have doubted you :cool: