PDA

View Full Version : RODI - problem with DI canisters


SteveConn
01-25-2017, 01:29 AM
After over 5 years without issues, today, when I went to refill my DI canisters (I have 3), I noticed they were all expanded inside the holder. One (the first in the series) was actually burst inside the holder with DI resin spilled out. I cant get the other 2 out of the holder and will likely have to break the canisters apart to use the RODI unit again.

Has anyone ever had this issue or any ideas of how this happened?

gregzz4
01-25-2017, 02:01 AM
Post some pics?

SteveConn
01-25-2017, 02:23 AM
The canister I was able to remove. Was already burt and spilling resin beads

http://i1084.photobucket.com/albums/j410/Steve_ConnYYC/IMG_9398_zps9kx1x567.jpg (http://s1084.photobucket.com/user/Steve_ConnYYC/media/IMG_9398_zps9kx1x567.jpg.html)

Deformed plastic looking from top (while in canister holder)

http://i1084.photobucket.com/albums/j410/Steve_ConnYYC/IMG_9399_zpsbjydqlli.jpg (http://s1084.photobucket.com/user/Steve_ConnYYC/media/IMG_9399_zpsbjydqlli.jpg.html)

One of two remaining DI units with canister inside. Inner canister pressed against side so hard! (notice white arrow from stressed plastic)

http://i1084.photobucket.com/albums/j410/Steve_ConnYYC/IMG_9400_zpsizrvwr0r.jpg (http://s1084.photobucket.com/user/Steve_ConnYYC/media/IMG_9400_zpsizrvwr0r.jpg.html)

DKoKoMan
01-25-2017, 05:41 AM
Yikes! I haven't saw this happen before. Makes me wonder if I should be unscrewing my clear filter canisters at least once a year.

SteveConn
01-25-2017, 06:22 AM
I've had the RODI unit for over 5 yrs, but I change out/refill often. Last time was about 4 months ago.
I cant figure out why the DI resin canisters are looking like they expanded.

I'll have to cut the other two out and put new canisters which I just ordered from J and L. I'd just like to know what happened... makes no sense to me.

:question::sad:

smokinreefer
01-25-2017, 05:18 PM
Any chance they started freezing?

I'm gonna guess not, but that's all I can come up with...

Myka
01-25-2017, 06:14 PM
Did you pack them too tight? The resin does expand a little bit... But that seems quite extreme! It does look like they froze, but why no damage anywhere else?

FishyFishy!
01-25-2017, 08:05 PM
Any chance they started freezing?


^^^ this..

This happened to me, only all of my canisters blew up right at the threads.

SoloSK71
01-26-2017, 12:09 AM
Any chance it is water pressure?

Charles

gregzz4
01-26-2017, 02:10 AM
Can't be water pressure or freezing. Either of these would cause the canister to break, not the cartridge.
Mindy may have something about the resin expanding, and if it's packed too tightly will burst the cartridge.

Sorry Steve, can't help ya. I looked all over the web with numerous different search params and found nothing. Looks like you're the lucky 'first' one to have this happen.

I'd be curious to see what the guys @ BRS might say about this ...