Log in

View Full Version : List of nice to haves in a sump room


vanreefer
08-01-2015, 02:43 PM
Hi
I am designing and building my sump room this weekend (6' x 7')... What do u wish u included.... Or was the best thing u included in ur sump room design
Thanks
VR

Aquattro
08-01-2015, 03:07 PM
Beer fridge?

jon.smolders
08-01-2015, 03:11 PM
I have a brute container that automatically fills with RO water. There is a ball valve plumbed into it so I have fresh RO available on demand. I also use this container to top off my tank through a float valve in the sump. My ro filter is on a garden water timer and I have programmed it to run for an hour a day to refill the water in the container with a float valve on the end in the event that the brute container ever gets full. I usually only keep it 1/3 full though because I don't want to dump 20 gallons of water into my sump if the float valve ever failed. The automation is great. I like never having to think about freshwater top off, however if I had the space I would have liked to have a separate RO storage container and a separate RO top off container.

vanreefer
08-01-2015, 03:18 PM
Beer fridge?

Already in the sketch 👍

Scythanith
08-01-2015, 03:21 PM
Here's a quick list:

Scullery sink
City water tap and RODI water source
Floor drain
Workspace (countertop)
Shelving & cupboards
Double the plugs you think you need (mixed GFCI (for heaters) & non-GFCI (for main pumps))
Small Fridge and Freezer (fridge could be a small wine bottle chiller *Colby's idea*)
Suspended ceiling or easy way to suspend wires and cables from the roof
Mold & mildew resistant drywall
3/8" or 1/2" painted plywood applied to the walls to fasten stuff to!
Electric raceway to conceal cables
HVAC or a direct vent outside with a humidistat control

I wish I had more plugs in my fishroom and will likely add some more before I finish the backsplash.

http://www.lithicimages.com/photos/i-VStsvnH/0/L/i-VStsvnH-L.jpg

http://www.lithicimages.com/photos/i-b6Cn8Dz/0/L/i-b6Cn8Dz-L.jpg

http://www.lithicimages.com/photos/i-SgsKh3g/0/L/i-SgsKh3g-L.jpg

http://www.lithicimages.com/photos/i-8tRXXcB/0/L/i-8tRXXcB-L.jpg

http://www.lithicimages.com/photos/i-4P7TQd8/0/L/i-4P7TQd8-L.jpg

Werbo
08-01-2015, 03:28 PM
Quite ceiling fan vented outside house
Roxal soundproof insulation
Sump drilled and plumbed to floor drain

Scythanith
08-01-2015, 03:28 PM
I have a brute container that automatically fills with RO water. There is a ball valve plumbed into it so I have fresh RO available on demand. I also use this container to top off my tank through a float valve in the sump. My ro filter is on a garden water timer and I have programmed it to run for an hour a day to refill the water in the container with a float valve on the end in the event that the brute container ever gets full. I usually only keep it 1/3 full though because I don't want to dump 20 gallons of water into my sump if the float valve ever failed. The automation is great. I like never having to think about freshwater top off, however if I had the space I would have liked to have a separate RO storage container and a separate RO top off container.

My system uses a solenoid on a timer so it only opens twice a day for 5 minutes. And that's just to fill the pail. There is still the tunze osmoregulator controlling the actual filling of the sump from that bucket. Double redundancy makes me happy :)

http://www.lithicimages.com/photos/i-gDh5H3K/0/L/i-gDh5H3K-L.jpg

The new AWC has an RODI section and a FSW section that the profilux will control :)

http://www.lithicimages.com/photos/i-8LhCHHf/0/L/i-8LhCHHf-L.jpg

http://www.lithicimages.com/photos/i-jxsB2w5/0/L/i-jxsB2w5-L.jpg

Not quite done yet though!

e46er
08-01-2015, 03:32 PM
prety much all said already.

lots of power
good lighting for when your in there.
sink
counter space
exhaust fan
floor drain
sump plumbed to floor drain

WarDog
08-01-2015, 03:48 PM
I would do vinyl wall paneling, like they use in commercial kitchens.

vanreefer
08-01-2015, 03:56 PM
So far so good... Minus the floor drain😞

lastlight
08-01-2015, 03:56 PM
I painted my floor with an epoxy. Looked pretty and wiping up spills was so easy.

The Guy
08-01-2015, 04:26 PM
Beer fridge?
Again Brad comes through with great advise! :lol:

The Guy
08-01-2015, 04:29 PM
I would do vinyl wall paneling, like they use in commercial kitchens.
+1

e46er
08-01-2015, 04:53 PM
So far so good... Minus the floor drain😞

Plunb it into your sink drain then almost foolproof for a flood

Ryanerickson
08-01-2015, 04:53 PM
Floor drain is nice but unless there's already one good luck not a easy install. I ran 3 new 15amp breakers for lots of power also if one breaker goes for some reason it does not shut everything down.main return is on its own plug so it never stops.

whatcaneyedo
08-02-2015, 06:15 PM
At 6'x7' you're going to have less space than me so you'll either need to be a lot more creative or you won't be able to accommodate many of these suggestions. One that hasn't been mentioned so far is some ducting to draw fresh air in from outside. Otherwise, in the winter the hot humid air you exhaust out will be replaced by household air that you are paying to heat. Let me also suggest that you buy the largest exhaust fan that you can find. 50 cfm wouldn't make a dent in the humidity in my room, 110cfm still left it extremely hot, it took 300cfm to get the job done.


http://i254.photobucket.com/albums/hh109/whatcaneyedo/20150427_000538_zps0lcc75d8.jpg

http://i254.photobucket.com/albums/hh109/whatcaneyedo/20150427_000503_zpshbfqk0ao.jpg

originalozzyo
08-04-2015, 05:54 AM
I would recommend that you have all your outlets gfci protected. Electrical code states that any outlet within 3' has to be properly protected. I do this for a living and it just provides peace of mind since you would have open sources of water within reach everywhere.