PDA

View Full Version : LF : 1" pvc and 1 1/2" PVC


camaro7019
05-07-2015, 03:56 AM
as the title says, just need small chunks I need 48" of each, anyone have any?

duncangweller
05-07-2015, 04:05 AM
Its only $4 for 10' of 1" at home depot

gregzz4
05-07-2015, 04:12 AM
I think the Home Depot/Rona stuff is only Sch40

If their hours suit you, you can get what you need from Vancouver Irrigation Supply (http://www.vanirr.ca/contact-vancouver-irrigation-supply/)
I've bought smaller lengths from them before

I haven't been there for a couple years as I work closer to Corix now

duncangweller
05-07-2015, 04:16 AM
It is. I didn't see anywhere on the post that said schedule 80..... I still don't for that matter.

camaro7019
05-07-2015, 04:18 AM
I know 1" cheap. But cant find 1 1/2 in shorter lengths

gregzz4
05-07-2015, 04:19 AM
Only brought it up if it's something he didn't think to mention :wink:

rishu_pepper
05-07-2015, 05:54 AM
I have both 1" and 1.5" sch40 PVC, long lengths. PM me if you want.

robdavids
05-16-2015, 03:30 AM
you dont need sch 80 for any fish tank application unless you want the grey look. sch 40 is plenty and adapts to any sch 80 fitting

Aquattro
05-16-2015, 05:15 AM
I don't even use that, I just get that thin wall stuff. Even cheaper!

gregzz4
05-16-2015, 05:43 AM
Sch40 is OK for pipe, but when it comes to fittings you need to look inside to see the clearance
"Skid40" fittings have a much smaller opening compared to Skid80 fittings

Aquattro
05-16-2015, 05:47 AM
I get the white fittings. Work good.

gregzz4
05-16-2015, 05:49 AM
I hate the white ones ... Sch40 are restrictive
Compare the insides of them against Sch80 and you'll see what I mean. Big difference

Aquattro
05-16-2015, 05:50 AM
Water goes through holes, I'm happy.

gregzz4
05-16-2015, 06:17 AM
Water goes through holes, I'm happy.
Yup, it does.
Guess it all comes down to how much water you want to go through said holes

When planning plumbing I look at the fittings and see Sch40 cuts down flow considerably when it comes to unions/valves etc
Not my choice for parts, but to each his own. Or just what they can find locally :lol:

Aquattro
05-16-2015, 06:22 AM
Yup. I simply need water to fall into sump, go back into tank. Done. The lumbing I have can support 5 times the flow I use, so whatever fitting home depot sells does the job. The entire plumbing job on my tank cost less than 20 bucks.

helimech
05-18-2015, 04:50 PM
rona on south fraser in abbotsford will sell you shorter lengths, but they are a bit pricy

Ryanerickson
05-18-2015, 05:12 PM
I hate the white ones ... Sch40 are restrictive
Compare the insides of them against Sch80 and you'll see what I mean. Big difference

Greg think your confused sch80 pipe is a bit smaller inside but outside diameter is the same so sch 80 pipe will work with sch40 fitting. Sch80 fitting are same inside size but the outside of the fittings are bigger. Sch80 would be the most restricting but so little diffrence I think that's irrelevant. Also sch80is crazy overkill on aquariums unless your looking for the grey look your just wasting your money.in plumbing only time I really use sch80 PVC is under warehouses for potable water before they build. sch80 is super thick pipe therefore will not crack or break as easy plus less susceptible to freezing. I know your looking for a small piece but if you can not find it corix will sell you a full length for cheap and there all over bc good luck.
http://i864.photobucket.com/albums/ab208/ryan_erickson/0D14345A-F7D1-4FF3-B4FB-E0234FD995D8_zpskv6dmdj0.jpg
http://i864.photobucket.com/albums/ab208/ryan_erickson/D56D4355-375C-4288-9CFD-90A15E7E5F38_zpsk1778zpt.jpg
http://i864.photobucket.com/albums/ab208/ryan_erickson/38FF0015-7561-4101-BBB4-AE15B8A504F0_zpsseq02z3o.jpg

The Guy
05-18-2015, 05:15 PM
Otter co-op @ 248th & Fraser Hwy sells short pieces of pvc.

Aquattro
05-18-2015, 05:16 PM
http://www.sprinklerwarehouse.com/PVC-Fittings-Sch-40-vs-Sch-80-s/7615.htm

gregzz4
05-31-2015, 12:21 AM
Greg think your confused
There's always a possibility of that :wink:
Something from a few years ago is trying to come back to me.
I bought some parts from Rona, and some from Vancouver Irrigation.
I'd swear the skid40 from Rona had a smaller I.D. than the skid80 stuff from VI.

Didn't make sense to me at the time as 1" is 1". I realize they both accept the same pipe size.
I'm thinking it was a valve comparison. May have been between a ball and true union ball. Can't remember.