duncangweller
02-11-2014, 03:38 AM
Hi All,
I have recently changed the order in which the lights turn on using my apex controller on my 6 bulb t5 tek light fixture.
It used to be:
2 bulbs>2 bulbs off and 4 on>all 6 on.
I have now changed it to:
4 bulbs on> 6 bulbs on > 2 off down to 4 bulbs again.
Now, all switches over fine until it tries to go from 6 bulbs in the eve down to four. When the two bulbs go off, it trips my GFCI and everything shuts down.
Even if I turn the bulbs off manually at any time going from 6 to 4 it trips the GFCI.
It never did it on my previous schedule and now I'm really stumped as to what's happening. The last thing I want is for it to happen when I go to work and have no flow or heat all evening.
Hope someone can help.
Thanks,
Dunc
I have recently changed the order in which the lights turn on using my apex controller on my 6 bulb t5 tek light fixture.
It used to be:
2 bulbs>2 bulbs off and 4 on>all 6 on.
I have now changed it to:
4 bulbs on> 6 bulbs on > 2 off down to 4 bulbs again.
Now, all switches over fine until it tries to go from 6 bulbs in the eve down to four. When the two bulbs go off, it trips my GFCI and everything shuts down.
Even if I turn the bulbs off manually at any time going from 6 to 4 it trips the GFCI.
It never did it on my previous schedule and now I'm really stumped as to what's happening. The last thing I want is for it to happen when I go to work and have no flow or heat all evening.
Hope someone can help.
Thanks,
Dunc