View Full Version : rbta removal
acepumping
01-27-2014, 09:24 PM
Is there a good way besides chipping my rock to remove a rbta..
Thanks
spit.fire
01-27-2014, 09:26 PM
Point a powerhead at it and wait
acepumping
01-27-2014, 09:29 PM
Wait how long tyler?
Littlefishy
01-27-2014, 09:33 PM
Dangle it upside down out of water and peel away at it with a credit card. They're practically indestructible
spit.fire
01-27-2014, 10:12 PM
Wait how long tyler?
I've had it take up to 4 days lol
The credit card comment works well also just as long as it isn't in a hole
CM125
01-27-2014, 11:33 PM
we tried the point the blower trick and it ended up in the blower the next night... best is to completely disturb the rock hes on (move it out in the open or in complete darkess, whichever is opposite) and cover up the intake on your blowers, check on him at night and you will find hes loose or wandering...
Slyguy00
01-27-2014, 11:37 PM
Or you can just rub its foot until it lets go. If you can get to it of course. Sometimes it takes 2 minutes sometimes it takes 20, but if you can rub even a tiny bit of the foot it will work. in my experiences anyway
mohammadali
01-28-2014, 02:38 AM
i removed few of my RBTA and GBTA i took out the LR and hold it out of the water and use turkey baster blow water on it till it come off the LR
GROPP
01-28-2014, 02:15 PM
Ice cube on the foot, or an air pump with the air hose bubbling on the foot
vBulletin® v3.7.3, Copyright ©2000-2024, Jelsoft Enterprises Ltd.