Algea magnet on 3/4 inch glass

[Chase31]

So my glass is 3/4 thick (guy that build it went overkill, but i dont mind). I was wondering what a good Magnet would be? wanted to use the flipper as it has a scraper build in, but it says max 1/2 inch glass.

http://www.reefsupplies.ca/online-store/Flipper-Aquarium-Algae-Magnet-Cleaner.html

[spit.fire]

Hammerhead or vertex are the only 2 I can think of

[Chase31]

the vertex triplex will work okay? i like the way it looks, BRS says 5/8
http://www.bulkreefsupply.com/catalog/product/view/id/2170/

[spit.fire]

the vertex triplex will work okay? i like the way it looks, BRS says 5/8
http://www.bulkreefsupply.com/catalog/product/view/id/2170/
id go with the hexaplex, the triplex would be pushing it

[Madreefer]

There's no comparison between the Vetrex Hex and the Hammerhead. Go with the Hammerhead. I have both

[spit.fire]

There's no comparison between the Vetrex Hex and the Hammerhead. Go with the Hammerhead. I have both
PHHHHH watever







































according to my reef adviser you are correct tho

[Chase31]

I was going to order the triplex, that wont be sufficent? i was hoping not to have to spend to much

[Aquattro]

i was hoping not to have to spend to much

That went out the window with the 3/4" glass :)

[Chase31]

so the hammerhead will work with my glass? or will i have to get the tiger shark?

[Aquattro]

I have the HH on my 1/2" glass, so for 3/4, I'd go bigger.

[Chase31]

Okay well since I'm away on work I'm getting my gf to measure it cuz I feel like it's 3/4 hope it's only 1/2

[Chase31]

So my glass is only half inch, is the vertex one better or the hammerhead?

[lastlight]

I used a cheap mag float on my 3/4" tank without issue. It would let go if you went too fast but I kept my glass clean just fine. More passes with less pressure... and cheap did i mention that?

[kien]

I have no experience with the Vertex, been using the hammerhead for years. I like that the hammerhead comes with an extra pad and easily velcros on and off. I've owned my hammerhead for 3 years and just replaced the pad with the spare that it came with, recently.

[Madreefer]

I have no experience with the Vertex, been using the hammerhead for years. I like that the hammerhead comes with an extra pad and easily velcros on and off. I've owned my hammerhead for 3 years and just replaced the pad with the spare that it came with, recently.

You can't go wrong with the Hammerhead. The customer service is great too. Mine is off warranty and they are still replacing it.
I have 2 Magfloats and the Vertex Hexplex. And I'll say it again. There's no comparison. Plus the Vertex doesn't float and it's same as the Magfloat. If you use in a circular motion it falls off the inner glass.

[sphelps]

I've never used or even seen the vertex but if it doesn't float then it's a no brainier to me. I use Hammerhead, I've had the same one for many years and it's seen 4 different tank setups so the extra cost seems to be well worth it.